Loading...

DATA CONNECT PE202T BELL 202T 0-1200BPS PCB 2/4 WIRE LEASED LINE & MULTIPOLLING

SKU: 865 Category:

$112.50

Description

DATA CONNECT PE202T BELL 202T 0-1200BPS PCB 2/4-WIRE LEASED LINE & MILTIPOLLING

 

OEM Modem Series
To service the growing need for efficient , reliable data communication in harsh in environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that con operate at 5V logic (TTL) or simple send and receive signals and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from the state-of-the-art communication devices. The rapid move toward “intelligent” substations, where meters, relays, RTU’s, and SCADA units where the conveniences of standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing the PE2.4, PE9.6FPD, PE1.4, PE14.4L, PE202T, and PE28.8 OEM modems designed specifically for harsh environments.

The PE OEM modems are highly sophisticated full duplex, V.22bis data modems that are designed to interface with RS232, RS485 (external device), 5V logic (TTL) or simple send and receive signals. The PE2.4, PE14.4, and PE28.8 OEM modems operate at full or half duplex on a dial line. The PE202T, PE14.4L, and PE9.6FPD OEM modems operate full or half duplex on a 2 or 4 wire leased lines.

The PE OEM SPEC’s can be found in the MIU modems, MD cards, and the MIU Power Port modems.

Features

Modem Interface Units 5V logic (TTL)
Simple send and receive signals
2400kbps 2-wire dial-up line modem
5V logic (TTL) power supply
IEC801-4 surge protection
-40C to +85C operating temperature
For meters, relays, SCADA etc.

Specifications

PE2.4
Modem Line Speeds:
asynchronous 14000, 9600, 4800, 2400, 1200, & 300bps, 0-1200bps

Transmission Line:
2 & 4 wire leased line or private line

Compatibility:
Hayes Extended AT Command Set

Power:
5V logic (TTL); PE28.8

Modem Line Speeds:
asynchronous 28800, 14400, 9600, 4800, 2400, 1200, & 300bps

Standards:
V.34, V.32bis, V.32, V.22bis, V.22, Bell 212A, Bell 103, Bell 202T

Transmission Line:
Dial-up

Compatibility:
Hayes Extended AT Command Set
 

General Specs

Card size:
3.4” x 0.01” x 0.5”

Digital port:
DTE 8-pin, simple send/receive signals

Analog port:
RJ11 modular jack

Surge protection (power line):
8kV (exceeds IEC801-4) (20kV [IE801-5] available if required)

Surge protection (analog line):
5kVAC

Environment:
-40C to +85C, 0-95% humidity (non-condensing)

Certificates:
FCC part 68, industry Canada

 

Ordering Information

DCE/PE2.4 2-wire dial-up PCB
DCE/PE9.6FPD 2 & 4-wire leased line PCB
DCE/PE14.4 2-wire dial-up PCB
DCE/PE14.4L and 4-wire leased line PCB
DCE/PE202T 4-wire leased or private line PCB
DCE/PE28.8 2-wire dial-up PCB

Additional information

Weight 5.00 lbs
Dimensions 12.00 × 12.00 × 12.00 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.